Various
The ultimate manhole covers site

General


The covers in Ramla are generally made of metal or concrete , but there are also plastic (composite material) covers .
Their shapes are round , square , elliptical , or rectangular .
In many cases, when round covers are intended for sidewalks, they are surrounded by a square frame, which greatly facilitates the paving work around them (these are essentially all the square covers found on the site).

The covers in Ramla are neither colored nor golden.

Covers intended for the Ramla Municipality usually bear the municipal emblem or the inscription "Ramla Municipality" .
Many covers are intended for the water corporation “Tamar”, which serves the city .

As in other cities in Israel, a relatively large number of covers intended for other cities (category “Bug”) was found . Also in the “Bug” category are covers belonging to water corporations other than “Tamar” .

There are also covers intended for consumers that are not necessarily municipalities or local councils. These covers are not tied to any particular city and can be found throughout Israel. Examples include covers for Bezeq and Ayalon Highways .

The function of the cover is usually indicated on it (water , sewage , communications etc.), so the number of covers in the “Unknown” category is relatively small.

On many of the covers in Ramla the year of manufacture appears .

In general, the cover designs in Ramla are not unique and follow designs typical of the manufacturer.

Manufacturers
The manufacturer’s name usually appears on the covers, and most of the covers are produced in Israel by several leading manufacturers - Menashe Baruch , Solid , A. Telitmacher and others.
It is rare to find covers produced in other countries, but they do exist, such as a cover produced by the French company Norinco .

Standards
The cover standards include standards unique to Israel: the Standards Institute of Israel mark , and Israeli Standard 489 (equivalent to the international EN124 standard) . In addition, the international EN124 standard appears, as well as the various load ratings (B125-D400) . Additional standards appear mainly on covers not produced in Israel.
Number of covers:
56 (Of these, 0 are best covers)
In the following shapes (5 shapes):
Circle (29)Square (18)Elliptical (6)Rectangle (2)Square round corners (1)
Materials (3 Materials):
Metal (43)Metal and Concrete (12)Plastic (1)
In the following categories (9 categories):
Water (16) Sewage (13) Bug (10) Cable / Comm. (4) Drainage (4) Electricity (3) Lighting (2) Traffic (2) Unknown (2)
Which include the following standards (7 standards):
The Standard mark of the Standards Institute of Israel (42) EN124 (28) IS 489 (22) B125 - Light to moderate load - sidewalks or cars parking (20) D400 - Heavy load - roads and sidewalks (8) C250 - Moderate load - road-curb (7) NF (1)
Made by manufacturers (10 manufacturers):
Menashe Baruch (23) Solid Casting (8) A. Telitmacher & Sons (6) Vulcan Foundries (3) Gelem Concrete Products (2) K. Hoffman and his sons (2) Sela (2) Yosef Rokach And Sons (2) Ametis (1) Norinco (1)
Used by (12 clients):
Ramla municipality (27) Ramla Water Corporation (13) Tel Aviv Municipality (3) Rehovot Municipality (2) Ayalon Highways (1) Bezeq (1) Bnei Brak Municipality (1) Haifa Municipality (1) Hot (1) Mei Avivim (1) Mei Lod (1) Tamar Regional Council (1)
Taken by (3 photographers):
Eli Zvuluny (54) Gil Ovadia (1) Israel Preker (1)

The ultimate manhole covers site

Initiating the site - Eli Zvuluny - Programming and building the site Possible Worlds Ltd. Possible Worlds Ltd. © 2017-2025

© ALL RIGHTS RESERVED - The site and its content are copyright protected. The full copyrights of the site's content belong to Eli Zvuluny. All images in the site (unless another photographer is mentioned) were taken by Eli Zvuluny that has the full copyrights on them. The use of any images or other materials included herein, in whole or part, for any purpose is expressly prohibited without the written permission of Eli Zvuluny. .